Skyrc Quattro B6AC Manuel d'utilisateur télécharger pdf (Page 16)

PB( LEAD-SULPHURIC ACID) BATTERY PROGRAM

This is programmed for charging Pb(lead-sulphuric acid) battery with nominal voltage from

2 to 20V. Pb batteries are totally different from NiCd or NiMH batteries. They can only

deliver relatievely lower current compare to their capacity, and similar restrictions definitely

apply to charge. So the optimal charge current will be 1/10 of the capacity. Pb batteries

must not be charged rapidly. Always follow the instruction is supplied by the manufacturer

of battery.

When you are willing to alter the parameter value in the program, press Start/Enter key to

make it blink then change the value with INC or DEC key. The value will be stored by

pressing Start/Enter key once.

DISCHARGING OF PB BATTERY

Battery

type

DEC

Batt type

Stop

Elapsed

time

INC

Charge

current

Battery

voltage

DEC

Start

Enter

INC

Charged

capacity

'> 3 seconds '

DEC

Batt type

Stop

INC

DEC

Start

Enter

INC

Battery

type

Elapsed

time

Discharge

current

Battery

voltage

Discharged

capacity

'> 3 seconds '

Set up the charge current on the left and the nominal voltage of

the battery on the right. The charge current ranges from 0.1 to

6.0A and the voltage should be matched with the battery being

charged.

Start the charge process by pressing Start/Enter key for more

than 3 seconds.

The screen displays the state of charging process. To stop

charging forcibly, press Batt type/Stop key once.

The audible sound indicates you at the end of process.

Set discharge current on the left and final voltage on the right.

The discharge current ranges from 0.1 to 2.0A.

To start the process, press Start/Enter key for more than 3

seconds.

The screen displays the current state of discharge. You can alter

the discharge current by pressing Start/Enter key during the

process. Once you change the current value, store it by pressing

Start/Enter button again.

To stop discharging press Batt Type/Stop key once. The audible

sound indicates you at the end of process.

CHARGING OF PB BATTERY

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Skyrc Quattro B6AC Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Fournisseurs d'énergie Skyrc Quattro B6AC