Skyrc Quattro B6AC Manuel d'utilisateur télécharger pdf (Page 6)

SPECIAL FEATURES

Fast and storage mode of lithium battery

Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging,

whereas 'store' state can control the final voltage of your battery, so as to store for a long

time and protect useful time of the battery.

Maximum safety

Delta-peak sensitivity: The automatic charge termination program based on the principle of

the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the

process will be terminated automatically.

Automatic charging current limit

You can set up the upper limit of the charging current when charging your NiCd or NiMH

battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO'

charging mode.

Capacity limit

The charging capacity is always calculated as the charging current multiplied by time. If the

charging capacity exceeds the limit, the process will be terminated automatically when you

set the maximum value.

Temperature threshold*

The battery's internal chemical reaction will cause the temperature of the battery to rise. If

the temperature limit is reached, the process will be terminated.

* This function is available by connecting optional temperature probe, which is not included

in the package.

Processing time limit:

You can also limit the maximum process time to avoid any possible defect.

Data store/load

The maximum ten batteries' data can be stored for each output(10X4SET). You can keep

the data pertaining to program setting of the battery of continuous charging or discharging.

Users can call out these data at any time without any special program setting.

Cyclic charging/discharging

1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable

for battery refreshing and balancing to stimulate the battery's activity.

Terminal voltage control(TVC)

The charger allows user to change the end voltage.

Lipo battery meter

The user can check battery's total voltage, the highest voltage, the lowest voltage and

each cell's voltage.

PFC (Power Factor Correction) internal integrated

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Pas de commentaire

Skyrc Quattro B6AC Manuel d'utilisateur Page 6